Whirlpool WET3300XQ Manual De Usuario

Clean the lint screen before each load. Pull the lint screen straight 

up. Roll lint off the screen with your fingers. Do not rinse or wash 

screen to remove lint. Push the lint screen firmly back into place.
For additional cleaning information, see “Cleaning the lint 

screen.”

Place laundry in the dryer. Close the door. 
NOTE: Your model may have a different door than the one 

shown. Some models have drop down doors.
Do not tightly pack the dryer; clothes should be able to  

tumble freely.

WARNING: To reduce the risk of fire, electric shock, or injury to 

persons, read the IMPORTANT SAFETY INSTRUCTIONS before 

operating this dryer.

Before using your dryer, wipe the dryer drum with a damp cloth  

to remove dust from storing and shipping.

Select the desired cycle for your load. See “Cycle Guide”  

for more information about each cycle. 
AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your 

load, by turning the knob to dryness level. 
Selecting Very Dry, ENERGY PREFERRED, or Less Dry  

automatically adjusts the dryness level at which the dryer will 

shut off. Once a dry level is set, it cannot be changed without 

stopping the cycle.
AUTOMATIC DRY cycles give the best drying in the shortest 

time. Drying time varies based on fabric type, load size, and 

dryness setting.
NOTE: Very Dry removes more load moisture. ENERGY  

PREFERRED is used for a starting point for AUTOMATIC DRY 

cycles. Choose ENERGY PREFERRED (*) for optimal energy  

savings. Less Dry removes less moisture and is used for loads 

you may want to put on a hanger to complete drying.