Whirlpool WTW8900BC Guía De Instalación Rápida

 Leveling your washer properly reduces excess 

noise and vibration. 

Move the washer to its final location. Rock the washer back  

and forth to check whether all four feet are stable and in firm 

contact with the floor. If the washer rocks, minor adjustments 

may be needed to level the washer on your floor.

Check the levelness of the washer. First, place a level  

on the lid near the console. Then place the level on the side  

of the washer in the crease between the top of the washer  

and the cabinet.

       Not Level 

            

LEVEL                    Not Level

Place level 

here

Place level here

If washer is not level, use a 9/16" or 14 mm open-end or  

adjustable wrench to turn jam nuts clockwise on feet until they 

are about 1/2" (13 mm) from the washer cabinet. Then turn the 

leveling foot clockwise to lower the washer or counterclockwise 

to raise the washer. Recheck levelness of washer and repeat  

as needed.
HELPFUL TIP: You may want to prop up front of washer 

about 4" (102 mm) with a wood block or similar object that  

will support weight of washer.

Jam nut

When washer is level, use a 9/16" or 14 mm open-end  

or adjustable wrench to turn jam nuts counterclockwise  

on leveling feet tightly against washer cabinet. 
HELPFUL TIP: You may want to prop washer with  

wooden block.

Jam nut