Whirlpool LOAD-SENSING W10330946A Manual De Usuario

After starting your washer, there will be a 

short pause before the washer begins to 

fill. The washer makes different sounds 

and pauses briefly throughout each cycle. 

This is normal.

Next, three nozzles spray to evenly 

saturate the load. Then a sensing step 

occurs. The filling stops, and the agitator 

moves the load for a very brief time.

The washer estimates how much more 

water to add; then, filling resumes and 

continues to sense until the right amount 

of water is reached. Now washing begins. 

The following describes what to expect when using a washer with load-sensing technology.

Load-Sensing determines the appropriate amount of water for each load based on your cycle and options selected for maximum 

energy and water savings. 

Although your new load-sensing washer may look the same as other washers, there are a few important steps that are required to 

maximize your water and energy savings:

Presort all of your laundry.

 

■

Add all of your garments and laundry products to the 

 

■

washer and washer dispensers. See “Starting Your Washer”.

Do not interrupt the cycle or open the lid after starting 

 

■

the washer. Opening the lid will reduce or eliminate water 

savings. If the lid is opened during fill, the washer will add 

more water to accommodate any additional load. If the 

lid is opened after the washer has completed filling, the 

washer will then fill to the highest level.

Water may not cover the top of the clothes and water level will 

vary with size of load. This is normal for Auto Load-Sensing 

washers. For these models, the water fill is optimized by the 

system for best wash performance.

IMPORTANT: To save water and energy, DO NOT OPEN THE LID 

after starting the washer.