Whirlpool Duet W10254043C Manual De Usuario

(Letter B in Dispenser Illustration)
Add liquid or powdered HE detergent to this compartment for 
your main wash cycle. The detergent type selector (A) must 
always be in the correct position for the detergent type used. Slide 
the detergent type selector to the correct position.
IMPORTANT: If you are using the Delay Wash option, powdered 
detergent must be used in the Main Wash compartment, since 
liquid detergents may seep out of the Main Wash compartment 
before the main wash begins.

■

Use the detergent manufacturer's recommended amount for 
load size.

■

Liquid or powdered color-safe bleach may be added to the 
Main Wash compartment along with the same type of 
detergent, liquid or powdered.

■

Liquid detergent:  

 

■

Powdered detergent:  

 

 

(Letter D in Dispenser Illustration)
Add no more than 

2

/

3

 cup (160 mL) liquid chlorine bleach to this 

compartment. The bleach will be automatically diluted and 
dispensed at the optimum time during the first rinse after the wash 
cycle. This compartment cannot dilute powdered bleach.

■

Always measure liquid chlorine bleach. Use a measuring cup 
with a pour spout; do not guess.

■

Do not fill beyond the “MAX” level. 

NOTE: Overfilling could cause garment damage.

■

At the end of the cycle, a small amount of water may be left in 
the dispenser. This is normal.

(Letter E in Dispenser Illustration)
Pour measured liquid fabric softener into the fabric softener 
dispenser, if desired.
IMPORTANT: Dilute all fabric softener with water for a total of 

 

1

/

4

 cup (60 mL).

■

Do not overfill. The dispenser holds 

1

/

4

 cup (60 mL). 

■

Do not spill or drip any fabric softener onto the clothes.

■

Use only liquid fabric softener in this dispenser. 

■

Do not use fabric softener dispensing balls in this washer. 
Dispensing balls will not operate correctly with this washer.

1. To pause the washer at any time, press PAUSE/CANCEL. 
2. To continue the cycle, press START (for approximately 

1 second).

Not all Options and Modifiers are available with all cycles. 
Available modifiers will glow amber. If an Option or Modifier is 
unavailable with a selected cycle, the light will not illuminate. 
Cycles, Options, and Modifiers can be changed anytime before 
START is selected. 
Options and Modifiers can be changed anytime after START is 
selected and before the start of the selected Option or Modifier. 

1. Press PAUSE/CANCEL twice.
2. Press POWER.
3. Select desired cycle.
4. Select the desired Options or Modifiers such as Water Temp, 

Spin Speed, and Soil Level. 

5. Press START (for approximately 1 second) to restart the 

washer at the beginning of the new cycle.

1. Press PAUSE/CANCEL twice. 
2. The washer powers down, the door unlocks, and clothes can 

be removed.

NOTE: If the water level or the temperature is too high, the washer 
will drain automatically before the door unlocks.

1. Press PAUSE/CANCEL once.
2. Select the desired Options or Modifiers such as Water Temp, 

Spin Speed, and Soil Level. Available selections will glow 
amber.

3. Press START (for approximately 1 second) to continue the 

cycle.

1. Press PAUSE/CANCEL twice.
2. Press POWER.
3. Select DRAIN/SPIN.
4. Press START (for approximately 1 second) to begin the drain.
5. When the spin is complete, the door unlocks. Items can be 

removed from the washer.