Siemens AC75 Manual De Usuario
AC75 AT Command Set
17.11 AT^SPBS
s
AC75_ATC_V01.002
Page 453 of 569
10/30/06
Confidential / Released
After a write command has terminated successfully with "OK", the value from
parameter
Mind after the last record of phonebook, the first entry follows.
1...maxindex
The index in the sorted list of phonebook entries that identifies the second entry
displayed.
Mind after the last record of phonebook, the first entry follows.
1...maxindex
The index in the sorted list of phonebook entries that identifies the third entry
displayed.
Mind after the last record of phonebook, the first entry follows.
String type phone number in format specified by
.
the number parameter may be an empty string.
Type of address octet, which defines the used type of number (ton) and the numbering plan identification (npi).
is, depending
.
Possible values are:
145
145
Dialing string
includes international access code character '+'
161
National number. Network support of this type is optional.
209
has been saved as ASCII string and includes non-
digit characters other than "*", "#" or "+". Note that phonebook entries saved
with this type cannot be dialed.
255
i.e. "*", "#" codes are contained. Network support of this type is optional.
129
Otherwise
Text assigned to the phone number.
Is a display of the "real"
of the entry required?
[0]
will not
be displayed
1
at the end of the
entry
The location within phonebook memory at which the corresponding entry is located.
This location may be used for other phonebook commands (e.g.
).
<index-b>
(num)
<index-c>
(num)
<number>
(str)
<type>
(num)
<text>
(str)(+CSCS)
<RealLocReq>
(num)
<location>
(num)