Siemens AC75 Manual De Usuario

s

AC75_ATC_V01.002

Page 81 of 569

10/30/06

Confidential / Released

0

(&F)

Discard "

" URCs. 

1

Discard "

" and "

" URCs when TA-TE link is reserved, e.g. in

online data mode. Otherwise they are forwarded directly to the TE. 

2

Buffer "

" and "

" URCs in the TA while TA-TE link is reserved, e.g.

in online data mode, and flush them to the TE afterwards. Otherwise they are

forwarded directly to the TE. 

3

Forward  "

" and "

" URCs directly to the TE. If AC75 is in online

data mode, URCs are signaled via sending BREAK and stored in a buffer.

Once it is back in command mode e.g. after 

 was entered, all URCs stored

in the buffer will be output. 

0

(&F)

Keypad event reporting is not supported by AC75. 

0

(&F)

Display event reporting is not supported by AC75. 

0

(&F)

Disable indicator event reporting. 

2

Enable indicator event reporting. 

0

(&F)

TA buffer of URCs defined within this command is cleared when 

 1..3

is entered. 

Name of indicator; for a list of all supported indicators please refer to 

 and 

Value of indicator; for a list of all values for the supported indicators please refer to 

 and 

• If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for

routing and indicating SMS. For example, if messages shall be routed directly to one instance of the TE (set

), it is not possible to activate the presentation of URCs with 

 or 

on another instance. Any attempt to activate settings that conflict with existing settings on another interface,

will result in CME ERROR, or accordingly CMS ERROR. 

• It is recommended that priority be given to 

 2 or 3. Otherwise, if 

 equals 1, URCs

will be discarded in case of long running AT commands or an active data connectiion. 

<mode>

(num)

<keyp>

(num)

<disp>

(num)

<ind>

(num)

<bfr>

(num)

<indDescr>

(str)

<indValue>

(num)