Konica Minolta Chroma Meter CS-200 Manual De Usuario
99
Com
mun
icati
on
Remote Mode
Remote mode refers to sending command from PC to this instrument with both connected.
If this instrument is controlled with PC, “REMOTE MODE” appears on PC. When this
message appears, key operation of this instrument is not acceptable except for following
cases.
If this instrument is controlled with PC, “REMOTE MODE” appears on PC. When this
message appears, key operation of this instrument is not acceptable except for following
cases.
• If measurement button is pressed, measurement starts to forward its data to PC. (in
case that measurement button is in valid mode by transferring command from PC to
this instrument. Use data management software below.)
this instrument. Use data management software below.)
• ESC key is pressed to cancel remote mode.
Use standard accessory data management software CS-S10w Standard for this pur-
pose.
See instruction manual of CS-S10w Standard for details on the spec and usage.
pose.
See instruction manual of CS-S10w Standard for details on the spec and usage.
If you want to use independent program in PC to control this instrument, download Com-
munication Specifications from KONICA MINOLTA SENSING’s website at URL below for
your reference.
http://konicaminolta.com/instruments/download/software/index.html
(Described URL above is subject to change without notice.)
(It the target page will not appear, please search the site by keywords, CS-200 and
download.)
In addition to above tools, various data management can be done with CS-S10w Profes-
sional.
munication Specifications from KONICA MINOLTA SENSING’s website at URL below for
your reference.
http://konicaminolta.com/instruments/download/software/index.html
(Described URL above is subject to change without notice.)
(It the target page will not appear, please search the site by keywords, CS-200 and
download.)
In addition to above tools, various data management can be done with CS-S10w Profes-
sional.