Konica Minolta Chroma Meter CS-200 Manual De Usuario
5
Storage
Body
• Do not store this instrument under direct sunlight or near heater. The internal temperature of this
instrument to becomes much higher than ambient temperature which may break this instrument.
• Store this instrument at ambient temperature between 0 and 40˚C and relative humid-
ity 85% or less (at 35˚C) with no condensation. Storage under high temperature and
humidity may deteriorate performance of this instrument. For added safety, we rec-
ommend storage with such drying agent at room temperature.
humidity may deteriorate performance of this instrument. For added safety, we rec-
ommend storage with such drying agent at room temperature.
• Take care not to form condensation. Avoid rapid change in ambient temperature when
transferring body for storage.
• Put body in packaging box supplied when purchased or optional soft case(CS-A23)
to store in safe place.
Objective Lens
• For storage, cover with standard accessory lens cap.
Cleaning
Body
• If this unit becomes dirty, wipe with dry and soft cloth. Do not use organic solvent like ben-
zine or thinner and other chemical agent for cleaning. Should none of these methods be
helpful, please contact the nearest KONICA MINOLTA SENSING authorized service facility.
helpful, please contact the nearest KONICA MINOLTA SENSING authorized service facility.
Objective Lens
• Should it be gotten dirt or dust, wipe off with dry and soft cloth or lens cleaning paper.
Do not use organic solvent like benzine or thinner and other chemical agent for clean-
ing. Should none of these methods be helpful, contact the nearest KONICA MINOLTA
SENSING authorized service facility.
ing. Should none of these methods be helpful, contact the nearest KONICA MINOLTA
SENSING authorized service facility.
Notes on transfer
• Use packaging material supplied when purchased to
minimize vibration or shock generated during transfer.
• Use holding cap for the same purpose especially to
protect optical system of this instrument. Set measur-
ing angle selector at center 0.2˚ and cover with holding
cap (CS-A24) supplied as standard accessory.
ing angle selector at center 0.2˚ and cover with holding
cap (CS-A24) supplied as standard accessory.
• Put all material including unit and accessories in original packaging material when
returning this instrument for service.
Maintenance
• Periodical checkup is recommended annually to maintain measurement accuracy of
instrument. For details on checkup, please contact the nearest KONICA MINOLTA
SENSING authorized service facility.
SENSING authorized service facility.