Graco 332453C - ExactaBlend AGP Advanced Glazing Proportioner Manual De Usuario

When a USB memory device is inserted into the USB 
module, a status icon will appear on the DM screen. The 
icon will appear as shown when downloading is com-
plete.

This file shows the date, time, error/event codes, and the 
status of the codes. Refer to DM Error Codes within the 
ExactaBlend AGP Advanced Glazing Proportioner, 
Setup-Operation manual for code information.

NOTE: The codes will have the following for the status 
column:

“0” - Error/event was generated
“1” - Machine acknowledged the error/event. There is no 
user acknowledgement required.
“2” - User acknowledged the error/event.

This file shows the date, time, target ratio, actual ratio, 
average flow rate, and both pump A and pump B chemi-
cal dispenses. All chemical dispense values are shown 
in kilograms. The information is recorded at 5 second 
intervals.

NOTE: The data is recorded only when the system is in 
the “OK” state and during normal run mode dispensing.

This file shows the date, time, part number, and soft-
ware versions currently installed on the machine.

NOTE: The file will only show the information when the 
download depth is set to “0”.