Garmin PDAs & Smartphones G1000 Manual De Usuario

190-00498-07  Rev A

533

FliteCharts data is revised every 28 days. Charts are still viewable during a period that extends from the cycle

expiration date to the disables date. FliteCharts is disabled 180 days after the expiration date and are no longer
available for viewing upon reaching the disables date. When turning on the system, the Power-up Page displays
the current status of the FliteCharts database. See the table below for the various FliteCharts Power-up Page
displays and the definition of each.

Blank Line. system is not configured for FliteCharts.  Contact a Garmin-
authorized service center for configuration.
System is configured for FliteCharts but no chart database is installed.  
Refer to Updating Garmin Databases in Appendix B for the FliteCharts 
database
Normal operation.  FliteCharts database is valid and within current 
cycle.
FliteCharts database is beyond the expiration date, but still within the 
180 day viewing period.
FliteCharts database has timed out.  Database is beyond 180 days 
after expiration date.  FliteCharts database is no longer available for 
viewing.

Other possible AUX - System Status page conditions are shown in Figure 8-68. ‘FliteCharts Expires’ plus a

date in white, indicates the chart database is current. ‘Chart data is out of date!’ in yellow, indicates charts are
still viewable, but approaching the disable date.