Garmin PDAs & Smartphones G1000 Manual De Usuario

190-00498-07  Rev A

545

The Scheduler feature can be used to enter and display reminder messages (e.g., Change oil, Switch fuel tanks,

or Altimeter-Transponder Check) in the Alerts Window on the PFD. Messages can be set to display based on
a specific date and time (event), once the message timer reaches zero (one-time; default setting), or recurrently
whenever the message timer reaches zero (periodic). Message timers set to periodic alerting automatically reset
to the original timer value once the message is displayed. When power is cycled, all messages are retained until
deleted, and message timer countdown is resumed.

1)  Select the AUX - Utility Page.
2) 

Press the FMS Knob momentarily to activate the flashing cursor.

Turn the large FMS Knob to highlight the first empty scheduler message naming field.

Use the FMS Knob to enter the message text to be displayed in the Alerts Window and press the ENT Key.

Press the ENT Key again or use the large FMS Knob to move the cursor to the field next to Type.

Turn the small FMS Knob to select the message alert type:

• Event—Message issued at the specified date/time

• One-time—Message issued when the message timer reaches zero (default setting)

• Periodic—Message issued each time the message timer reaches zero

Press the ENT Key again or use the large FMS Knob to move the cursor to the next field.

For periodic and one-time message, use the FMS Knob to enter the timer value (HH:MM:SS) from which to 
countdown and press the ENT Key.