Compex Technologies WP11A+ Manual De Usuario
Chapter 8
Configuration on Various WAN Type
48
8.3
Configuring PPP over Ethernet Session (PPPoE)
For Broadband service providers such as Pacific Internet Broadband and SingNet
Broadband, you have to select the PPPoE WAN configuration. This includes users in
Germany who use T-1 connection.
Broadband, you have to select the PPPoE WAN configuration. This includes users in
Germany who use T-1 connection.
NOTE
Certain ADSL Internet subscriptions require Service Name to be specified in
order to establish a PPPoE connection.
Certain ADSL Internet subscriptions require Service Name to be specified in
order to establish a PPPoE connection.
8.3.1
How to Configure SingNet, PacNet and QALA DSL Broadband
This procedure assumes you have a login account from SingNet, Pacific
Internet or QALA DSL broadband service, and also all the necessary hardware
installation is in place.
Internet or QALA DSL broadband service, and also all the necessary hardware
installation is in place.
NOTE
If you have opted for self-installation when you register for the broadband
service, you should first test out the ADSL modem by logging in from your
PC. Make sure it can connect successfully before attempting to run it with the
Compex WP11A+
If you have opted for self-installation when you register for the broadband
service, you should first test out the ADSL modem by logging in from your
PC. Make sure it can connect successfully before attempting to run it with the
Compex WP11A+
1. Click on the WAN Type option on the Command window. The default
Dynamic IP setup page will display.
2. Click on the “Change” button and check the radio button next to the PPP
over Ethernet.
3. Click on the “Save” button.
Figure 8.3a
PPP Over Ethernet –WAN Type