NobelCom Automatic Filter Series FD/D Manual De Usuario
AUTOMATIC FILTERS INSTRUCTIONS MANUAL
FC/D - FAC/D
s.r.l.Milano - ITALY
Page 3 of 14
p11.02-v34.f fcd_mi-r1.doc
1. Safety
1.1. General
The equipment has been designed and constructed according to D.P.R. n° 459 of 24th July
1996 (regulation for accomplishment of Norms 89/392/CEE, 91/368/CEE, 93/44/CEE and
93/68/CEE regarding the unification of States members laws in so far as machines are
concerned).
93/68/CEE regarding the unification of States members laws in so far as machines are
concerned).
It has been designed and constructed according to European Norms UNI EN 292-1, UNI EN
292-2, UNI EN 292-2/A1, UNI EN 983, CEI EN 60439-1, CEI EN 60 204-1.
Only authorized and skilled personnel will be allowed to carry out installation, start up as well
as routine and planned maintenance.
1.2. How to displace the unit
Particular care and attention should be put in during moving and displacing of heavy items, in
order to avoid injuries to persons or damage properties. The heavy parts must be lifted and
displaced always hooking and lifting them by the points shown on the drawings (see fig. 1) and
using only suitable ropes, hooks and/or chains, according to the weight (see weight table § 3.5
page 6).
displaced always hooking and lifting them by the points shown on the drawings (see fig. 1) and
using only suitable ropes, hooks and/or chains, according to the weight (see weight table § 3.5
page 6).
1.3. Hydraulics
All operations must be performed by and/or under direct supervision of skilled and authorized
operators, using proper tools and personal protection devices if required (CE marked).
Before any operation of taking out pipes or part of hydraulic system, it is required to release
the pressure inside and empty the part of the system.
1.4. Electrical
Before starting any operation on electrical devices, be sure that main power supply is OFF.
All operations must be performed by skilled and authorized operators.
In case of liquid leakage, switch off the main power supply before operate. Before the
switching ON, be sure all the parts of the system are perfectly dry. Check that the available
electrical power is correct, (see § 3.2 page 5) before connection. Do not make preliminary wiring
connections.
electrical power is correct, (see § 3.2 page 5) before connection. Do not make preliminary wiring
connections.
1.5. How to store and delivery
= ºC
t = ºF
humidity rel.
notes
•
closed rooms
5÷45 41÷113 5÷95%
without condensate
•
open space
5÷45 41÷113 5÷95%
without condensate
protect from sun-light and rain.
•
transport
5÷45
41÷113 5÷95%
without condensate
protect from sun-light and rain.