Craftsman 310.26825 Manual De Propietario

Descargar
Página de 15
3
WARNING
:Read and 
understand all instructions.
 
Failure to follow all instructions 
listed below, may result in electric 
shock, fire and/or serious personal 
injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and 
well lit. 
Cluttered benches and 
dark areas invite accidents.
Do not operate power tools in 
explosive atmospheres, such as 
in the presence of flammable 
liquids, gases, or dust. 
Power 
tools create sparks which may 
ignite the dust or fumes.
Keep bystanders, children, and 
visitors away while operating a 
power tool.
 Distractions can 
cause you to lose control.
Electrical Safety
Do not abuse the cord. Never 
use the cord to carry the 
charger. Keep cord away from 
heat, oil, sharp edges, or 
moving parts. Replace damaged 
cords immediately.
 
Damaged 
cords may create a fire.
A battery operated tool with 
integral batteries or a separate 
battery pack must be recharged 
only with the specified charger 
for the battery.
 A charger that 
may be suitable for one type of 
battery may create a risk of fire 
when used with another battery. 
Use  listed battery only with 
charger listed.
Use battery operated tool only 
with specifically designated 
battery pack. Use of any other 
batteries may create a risk of 
fire. Use only with battery pack.
Personal Safety
Stay alert, watch what you are 
doing and use common sense 
when operating a power tool. Do 
not use tool while tired or under 
the influence of drugs, alcohol, 
or medication.
 A moment of 
inattention while operating power 
tools may result in serious 
personal injury.
Dress properly. Do not wear 
loose clothing or jewelry. 
Contain long hair. Keep your 
hair, clothing, and gloves away 
from moving parts.
 Loose 
clothes, jewelry, or long hair can be 
caught in moving parts.
Avoid accidental starting. Be 
sure switch is in the locked or 
off position before inserting 
battery pack.
 Carrying tools with 
your finger on the switch or 
inserting the battery pack into a 
tool with the switch on, invites 
accidents.
Remove adjusting keys or 
wrenches before turning the tool 
on. 
A wrench or a key that is left 
attached to a rotating part of the 
tool may result in personal injury.
Do not overreach. Keep proper 
footing and balance at all times. 
Proper footing and balance enable 
better control of the tool in 
unexpected situations.
Use safety equipment. Always 
wear eye protection.
 Dust mask, 
non-skid safety shoes, hard hat, or 
hearing protection must be used 
for appropriate conditions.
GENERAL SAFETY RULES