Frye WinCHAP ver. 2.82 Manual De Usuario
WinCHAP User’s Manual
Introduction
5
Figure 1.1.2—Database Manager
1.2 Computer Requirements
WinCHAP runs on Microsoft Windows 95, 98, 2000, Me, NT 4.0, and XP. It
needs a Pentium chip or equivalent. You will need at least 32 MB of RAM and
30 MB of free hard disk space for the program to function optimally. Large data-
bases could require an additional 100 MB or more disk space. For best readabil-
ity, set your monitor to 800 x 600.
needs a Pentium chip or equivalent. You will need at least 32 MB of RAM and
30 MB of free hard disk space for the program to function optimally. Large data-
bases could require an additional 100 MB or more disk space. For best readabil-
ity, set your monitor to 800 x 600.
1.3 Setup
The RS232 connectors and cable will have come with your FONIX instrument
or with the RS232 package. Insert the ends of the cable into each of the con-
nectors. Attach the 25-pin or 9-pin connector (depending on your serial port)
labeled “COMPUTER” to COM 1 or COM 2 on your computer. Attach the other
connector to your FONIX instrument. See your instrument manual for more
detail.
or with the RS232 package. Insert the ends of the cable into each of the con-
nectors. Attach the 25-pin or 9-pin connector (depending on your serial port)
labeled “COMPUTER” to COM 1 or COM 2 on your computer. Attach the other
connector to your FONIX instrument. See your instrument manual for more
detail.
1.3.1 Adding Communications Ports
In many cases, your computer will only have one COM port that is already
being taken up by your hearing aid programmer. There are a couple of different
solutions to this problem.
being taken up by your hearing aid programmer. There are a couple of different
solutions to this problem.