Cisco Systems C9800 GA Manual De Usuario
2
2-3
Fiery on a TCP/IP network with Windows NT 4.0/2000/XP/Server 2003/Server 2003
Configuring a Windows NT 4.0/2000/Server 2003 server to
communicate with the Fiery
To configure a Windows NT 4.0/2000/Server 2003 server to communicate with the
Fiery, follow these general steps. More detail is provided in subsequent sections in this
chapter and in your Microsoft documentation.
Fiery, follow these general steps. More detail is provided in subsequent sections in this
chapter and in your Microsoft documentation.
•
Load the TCP/IP network protocol on the server and configure it with an IP address,
subnet mask, and gateway.
subnet mask, and gateway.
•
Enter the host name of the Fiery in the host name database used by your system (see
•
Perform Fiery Setup.
•
On the Windows NT 4.0/2000/Server 2003 server, create a printer for each Fiery print
connection, install the appropriate printer drivers, and (optionally) share the printer
on the network (see
connection, install the appropriate printer drivers, and (optionally) share the printer
on the network (see
•
Enter the host name and remote printer name of the Fiery in the printer connection.
For more information, see
For more information, see
.
•
If the Windows NT 4.0/2000/Server 2003 server is also a workstation, install Fiery
utilities (see the
utilities (see the
).