Compex Systems SA33-3285-02 Manual De Usuario
Examples
The following examples show typical output from the rescheck command. The Adapter
In Use field shows which adapter path the using system is using.
In Use field shows which adapter path the using system is using.
ssa_rescheck -l hdisk1
produces this type of output:
Disk
Primary Secondary Adapter Primary Secondary Reserved
Adapter Adapter
In Use
Access
Access
to
hdisk1 ssa0
------
ssa0
OK
-----
none
ssa_rescheck -l hdisk1 -h
produces this type of output:
hdisk1 ssa0
------
ssa0
OK
-----
none
The next example shows the disk drive Open by adapter ssa1. The disk drive is
reserved to ssa1, and adapter ssa0 has a Busy status. Because the two adapters are in
the same using system, the Busy status indicates that the node number is not set:
reserved to ssa1, and adapter ssa0 has a Busy status. Because the two adapters are in
the same using system, the Busy status indicates that the node number is not set:
Disk
Primary Secondary Adapter Primary Secondary Reserved
Adapter Adapter
In Use
Access
Access
to
hdisk2 ssa1
ssa0
ssa1
Open
Busy
ssa1
The next example shows that the disk drive is reserved to a node, because the
secondary access is OK (not Busy), and the Reserved To field shows the using system
name:
secondary access is OK (not Busy), and the Reserved To field shows the using system
name:
Disk
Primary Secondary Adapter Primary Secondary Reserved
Adapter Adapter
In Use
Access
Access
to
hdisk2 ssa1
ssa0
ssa1
Open
OK
abcd.location.com
Return Codes
0
The command has completed successfully.
1
A system error has occurred.
Any other value
An error that is more serious that 0 or 1 has occurred.
Chapter 16. Using the SSA Command Line Utilities
367