Axis Communications PS-24 Manual De Usuario
PS-24 Mains Adaptor
Alternative installation - PSU box
The vandal-proof PSU box is an optional accessory which can be mounted either on a pole
or on a flat surface.
1. Remove the top lid of the PSU box by
removing the 4 screws.
2. Place the PS-24 with the 4 cable glands
in the opening at the bottom of the PSU
box.
3. Replace the lid and lock it by tightening
the 4 screws.
4. Use the holder for the pole mount or use
the supplied screws to mount the PSU on
a pole or a flat surface.
5. Follow the instructions for the outdoor
housing to complete the installation.
Note:
• Use 4pcs. sleeve anchor with flange nut, drill size 6mm, M6, length >= 50mm (concrete screw, not included).
• Pole mount - the recommended pole diameter for this pole box is 130-140mm.
• Pole mount - the recommended pole diameter for this pole box is 130-140mm.
Examples of installation (PSU box and pole/wall mount)
Cable
glands
Screws
Holder for
pole mount
pole mount
Pole box mounting
Gooseneck
tube
Outdoor housing
for camera
for camera
Wall box mounting
Gooseneck
tube
tube
Outdoor housing
for camera