Gaggenau BO450611 Guía De Instalación

Connect red wire from oven to red electrical 
supply wire (hot wire).

Connect black wire from oven to black electrical 
supply wire (hot wire).

Connect yellow/green ground oven wire to bare 
ground electrical supply wire.

Attach flexible conduit to the junction box.

To facilitate serviceability, the flex conduit must not be 
shortened and should be routed to allow for temporary 
removal of the oven.

Connect red wire from oven to red electrical 
supply wire (hot wire).

Connect black wire from oven to black electrical 
supply wire (hot wire).

Connect white wire from oven to white electrical 
supply wire (neutral).

Connect yellow/green ground oven wire to 
electrical supply ground wire.

Attach flexible conduit to the junction box.

To facilitate serviceability, the flex conduit must not be 
shortened and should be routed to allow for temporary 
removal of the oven.

Fit the combi-steam oven first. Pay attention to the 
combi-steam oven's installation instructions.

For an installation depth of 550 mm (approx. 1.8 ft), 
position the water hoses and the connecting cable in 
the area of the housing cut-out. 

Fit the warming drawer first. Pay attention to the 
warming drawer's installation instructions.

Slide the oven onto the warming drawer and into the 
built-in cabinet. When sliding it in, do not damage the 
warming drawer's panel.

Installation BO/BS (width 30" (76 cm)) over warming 
drawer WS only with dimensionally stable partition 
floor.