Soleus HCCW10ESA1 Guía De Operación

  

1.  Place the air conditioner on the sill with the bottom 

mounting rail against its back edge. Center the air con-
ditioner and close the window securely behind the top 
mounting rail. The air conditioner should be slightly 
tilted to the outside area. Use a level; about a 1/3 bub-
ble will be the correct case slant to the outside. (See 
FIG. 

2 & FIG. 3) 

 
 

2.  Once the air conditioner is placed, extend both the left 

and right accordion panels to the width of the window

. 

4.   Secure the left and right flanges on end bottom side   

 
 

 
 
 

 
 

 
3.   

Place the curtain lock between the curtain extensions 

and the window sill, drive long screws through the 

lock and into the sill as shown below.

Now that you have installed the top rail, you can now install 
the accordion panels on each side.

 
1.  Place the air conditioner on a hard flat surface. 
2.  Locate the accordion panels in the box. 
3. 

Insert the side curtains into the upper and lower rails 

of the air conditioner. Fasten the curtains to the unit  

4.  Slide the free end of the accordion panel into the side 

panel of the air conditioner

. Do this for each side. The 

f

lange for securing the curtain into the window sill will

be facing the room side when installed.

of the panel with long screws. 

5.   Drive long screws through upper frame holes into

sash seal between the glass and the window to pre-

6.  

  and lower sashes and secure it with long screws.

Attach the sash lock to the place between the upper 

 

vent air and insects from getting into the room.

7.   Cut the foam seal to the window width and insert the

with short screws as shown below. 

window sash.

 8.   For added insulation, the insert strip can be inserted 

       between the air conditioner and window sill. This is 

       optional. 

ach side use 2 long screws.

E

 

7