Whirlpool WMH32519CB Instruccion De Instalación

Descargar
Página de 12
Recommended Vent Length
A 3
¹⁄₄
"
 x 10
"
 (8.3 x 25.4 cm) rectangular or 6
"
 (15.2 cm) round vent 
should be used.
The total length of the vent system including straight vent, 
elbow(s), transitions and wall or roof caps must not exceed the 
equivalent of 140 ft (42.7 m) for either type of vent. See 
“Recommended Standard Fittings” section for equivalent lengths.
For best performance, use no more than three 90° elbows.
To calculate the length of the system you need, add the equivalent 
lengths of each vent piece used in the system. See the following 
examples:
3
¹⁄₄" x 10" (8.3 x 25.4 cm) vent system = 73 ft (22.2 m) total
6" (15.2 cm) vent system = 73 ft (22.2 m) total
If the existing vent is round, a rectangular to round transition piece 
must be used. In addition, a rectangular 3" (7.6 cm) extension vent 
between the damper assembly and rectangular to round transition 
piece must be installed to keep the damper from sticking.
ASSISTANCE
Call your authorized dealer or service center. When you call, you 
will need the microwave oven model number and serial number. 
Both numbers can be found on the model and serial number 
plate, which is located behind the microwave oven door on the 
front frame of the microwave oven.
If you need additional assistance, call us at our toll free number or 
visit our website listed in the User Instructions.
Replacement Parts
If any of the installation hardware needs to be replaced, call us at 
our toll free number listed in the User Instructions.
Following is a list of available replacement parts. You will need 
your model number located on the front facing of the microwave 
oven opening, behind the door.
Damper Assembly
Mounting Plate
Upper Cabinet Template
Mounting Screw Kit (includes parts A-G in “Parts Supplied” in 
the “Tools and Parts” section)
Accessories
Filler Panel Kits are available from your dealer to use when 
installing this microwave oven in a 36" (91.4 cm) or 42" (106.7 cm) 
wide opening. The filler panels come in pairs. Each panel is 3" 
(7.6 cm) wide.
A. Filler panels
See your authorized dealer or service center for details.
A. One 3
¹⁄₄
" x 10" (8.3 x 25.4 cm) 90° elbow = 25 ft (7.6 m)
B. 1 wall cap = 40 ft (12.2 m)
C. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m)
A                                          B
C
6 ft (1.8 m)
2 ft
(0.6 m)
A. Two 90° elbows = 20 ft (6.1 m)
B. 1 wall cap = 40 ft (12.2 m)
C. 1 rectangular to round transition piece = 5 ft (1.5 m)
D. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m)
A                                                                  B
C                                  D
6 ft (1.8 m)
2 ft
(0.6 m)
Filler Panel Kit Number
8171336 
8171337 
8171338 
8171339 
99403
White 
Black
Biscuit
Stainless Steel
Almond
A
W10247296B
SP PN W10345003B
© 2010.
All rights reserved.
461965617428
9/10
Printed in China