Gaggenau DF281760 Manual De Propietario

Descargar
Página de 104
33
  Operating the Dishwasher    en-us
Tone volume
The end of the wash cycle is indicated by a buzzer. You 
can also change this setting.
Button volume
When you are operating the dishwasher, a signal 
sounds whenever a button is pressed. You can control 
the volume of the signal. If you do not like the button 
volume, you can switch it off.
Child-proof lock *
The dishwasher features an electronic child-proof lock. 
The child-proof lock protects children from potential 
hazards which the dishwasher poses. 
You can switch the child-proof lock on or off. When the 
child-proof lock is on, it is difficult to open the door.
* optional feature which may or may not be included with 
your dishwasher
Greeting
When you switch on the dishwasher, the brand logo 
appears. You can switch off the brand logo.
Factory setting
You can reset all settings to the factory setting.
Switching the appliance on
1.
Turn on tap fully.
2.
Open the door.
3.
Switch on ON/OFF switch (. 
The AUTO 130 - 150° F wash cycle has been preset 
as a default whenever the appliance starts. This wash 
cycle remains selected if no other wash cycle button 
0 is pressed.
4.
Press START button )".
5.
Close the door.
Wash cycle sequence starts.
Note: Your dishwasher is protected against 
unintentional operation. If the appliance door remains 
open for more than 4 seconds after pressing the Start 
button the operation will be paused. Press the Start 
button again and close the appliance door.
Delay start time
You can delay the start of the wash cycle by up to 
24 hours. Depending on the setting of the time display, 
the end of cycle is indicated with “Finish in” (for 
example 3h 25m) or “Finish at” (for example 15:20 
hours).
1.
Open the door.
2.
Switch on ON/OFF switch (.
3.
Select wash cycle 0.
4.
Press Delay start button `.
5.
Keep pressing the setting buttons + - X until the 
displayed time corresponds with your requirements.
6.
Press START button )", timer programming is 
activated.
7.
To delete the delayed start time, press START button 
)" for approx. 3 seconds.
Delayed start time is terminated.
8.
Close the door.
Note: Your dishwasher is protected against 
unintentional operation. If the appliance door remains 
open for more than 4 seconds after pressing the Start 
button the operation will be paused. Press the Start 
button again and close the appliance door.
Wash cycle end
* The wash cycle has ended when “Finished” is 
indicated on the digital display @. 
* The end of the wash cycle is displayed on the floor – 
provided the optical display is switched on and is 
visible. 
* optional feature which may or may not be included with 
your dishwasher