GE JGP633SETSS Instruccion De Instalación
15
Installation Instructions
units with 4 burners
units with 5 burners
e Install the LP/Propane orifices in their precise
locations as noted in the illustrations above.
f Return the natural gas orifices to the bracket
and reattach the bracket and
the instruction sheet to the pressure regulator
using the screw removed previously.
G Replace the burner bases, heads, caps and
top grates. (noTe: When re-attaching the
burner bases to glass top units, tighten screws
to a maximum of
10 in.-lbs torque.)
Left front
right front
Model
orifice
orifice
JGP630
II
III
JGP963
III
X
JGP970
ZGU36K
Replace: With:
JGP975
III
Main
206X N
➜ 108X L
Simmer 57N
➜ 34L
3
CHAnGe CooKToP Burner
orIfICeS (ConT.)
D Locate the LP/Propane orifices shipped
inside the literature package. They
will have a digit number and the letter “L” on
the side. (Important: Save the orifices
removed from the appliance
for future use.)
Each orifice will show a series of engraved
marks, (I, II, III, X or none),
located on the top.
These marks denote the precise location of each
orifice to the cooktop burner.
18,000 BTu/Hr Burner
(on some models)
noTe: The main orifice is located low in the center
of the burner while the simmer orifice is located
higher behind the center of the burner.
I
II
III
X
The 18,000 BTU/HR burner has two orifices with
markings located in the sides only. (See rating
plate on bottom of appliance).
I
II
III
X
Main orifice
Simmer
orifice