Liebherr HCB1561 Instruccion De Instalación
• The anti tipping bracket must be
mounted to prevent the appliance from
tipping when the fully stocked door is
opened.
• Be sure that there is no plumbing or
electrical wiring located in this area
which screws or drills could damage.
Mounting the Anti Tipping Device
- Figures 8 - 11
Mounting Options
Wa
ll
Flo
or
Wa
ll
Flo
or
The anti tipping bracket is provided with the
appliance.
1. Mark the center line of the appliance on the back
1. Mark the center line of the appliance on the back
wall. Align the anti tipping bracket center to this
line.
2. Depending on the constitution of the floor and
wall, use any possible mounting option as shown
in
Figures 8 - 11.
Wa
ll
Flo
or
Wa
ll
Flo
or
Mounting the bracket with the wall
stud.
Mounting with wall plugs to
Mounting with wall plugs to
concrete walls
(Figure 8).
Screws 6 x 63 mm
Mounting with the wall plate
turning in the screws at an
angle
(Figure 9).
Screws 6 x 63 mm
Mounting with wooden floors
(Figure 10).
Screws 6 x 63 mm
Mounting with concrete floors using
the anchors provided
(Figure 11).
Figure 8
Figure 9
Figure 10
Figure 11
IMPORTANT
The anti tipping bracket must be fitted at
the same height as the toe kick area. If you
set the appliance to a higher level by laying
spacers underneath, the anti tipping bracket
must be fitted accordingly.
8
B
lockInG
for
s
afety