Whirlpool WVW75UC6DS Manual De Propietario

Secure the bottom of the duct with 2 - 4.2 x 8 mm screws.

1. For non-vented (recirculating) installations only, install 

charcoal filters over metal grease filter. See the “Range Hood 
Care” section.

2. Install metal filters. See the “Range Hood Care” section.

3. Check the operation of the range hood blower and light. See 

the “Range Hood Use” section.

NOTE: To get the most efficient use from your new range hood, 
read the “Range Hood Use” section.

The range hood is designed to remove smoke, cooking vapors and 
odors from the cooktop area. For best results, start the hood 
before cooking and allow it to operate several minutes after the 
cooking is complete to clear all smoke and odors from the kitchen.

The hood controls are located on the front side of the canopy.

The On/Off light button controls both lights. Press once for On 
and again for Off.

The Blower Speed buttons turn the blower on and control the 
blower speed and sound level for quiet operation. The speed can 
be changed anytime during fan operation by pressing the desired 
Blower Speed button.

The Blower Off button turns the blower Off.

The switch controls the ambient lighting. 

1. Press to the left to turn AUTO On.

2. Press to the right to turn AMBIENT LIGHTING On.

3. Press to the center to turn AMBIENT LIGHTING or AUTO Off.

NOTE: When the Ambient Lighting is placed in the AUTO setting, 
a sensor will automatically sense if it is dark in the area around the 
range hood. The Ambient Lighting will turn on and stay on until it 
senses there is enough light in the area around the range hood, or 
the Ambient Lighting switch is placed in the ON or OFF position.

A

B

C

D

E

F

G

H

A

B

C

D

E