Whirlpool WFW9351YW Manual De Usuario

Descargar
Página de 56
4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. 
The parts supplied are in the washer drum. 
Tools needed for connecting the water inlet hoses 
Pliers (that open to 1
9
/
16
 [39.5 mm]) 
Flashlight (optional)
Tools needed for connecting the drain hose
Locking pliers (that open to 1
9
/
16
" [39.5 mm])
Tools needed for installation
Open end wrenches 14 mm and 13 mm
Level
Wood block 
Ruler or measuring tape
Parts supplied  
A
B
D
G
C
E
F
 
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Drain hose
E. Transport bolt hole plug (4)
F. Beaded strap
G. Hose clamp
Alternate Parts
Your installation may require additional parts. If you are interested 
in purchasing one of the items listed here, call the toll-free number 
on the cover or in the “Assistance or Service” section. 
If You Have
You Will Need to Buy
Laundry tub or 
standpipe taller 
than 96" (2.4 m)
Sump pump system (if not already 
available)
Overhead sewer
Standard 20 gal. (76 L), 30" (762 mm) tall 
drain tub or utility sink and sump pump 
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834; 
additional drain hose 
Part Number 8318155; and connector 
kit, Part Number 2858835 
Drain hose too 
short
4 ft (1.2 m) drain hose extension kit, 
Part Number 2858863
Water faucets 
beyond reach of fill 
hoses
2 longer water fill hoses: 

6 ft (1.8 m) Part Number 76314

10 ft (3.0 m) Part Number 350008
Options
Pedestal
You have the option of purchasing pedestals of different heights 
separately for this washer. You may select a 10" (254 mm) or a 
15.5" (394 mm) pedestal. The pedestal will add to the total height 
of the washer. 
Optional pedestal
 
Pedestal 

Height
Approximate 
Height with

Washer
Color
Model

Number
10" 
(254 mm)
46"
(1168 mm)
White
WHP1000SQ
10" 
(254 mm)
46"
(1168 mm)
Cranberry 
Red
XHP1000WR
15.5" 
(394 mm)
51.5"
(1308 mm)
White
WHP1500SQ
15.5" 
(394 mm)
51.5"
(1308 mm)
Cranberry 
Red
XHP1550WR
15.5" 
(394 mm)
51.5"
(1308 mm)
Lunar 
Silver
XHP1550WL
Stack Kit
Are you planning to stack your washer and dryer? To do so, you 
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your washer or 
refer to the “Assistance or Service” section of this manual. Ask for 
Part Number 8572546.
Location Requirements
Selecting the proper location for your washer improves 
performance and minimizes noise and possible washer “walk.”
Your washer can be installed under a custom counter, or in a 
basement, laundry room, closet, or recessed area. See “Drain 
System.”
Companion appliance location requirements should also be 
considered. Proper installation is your responsibility.
You will need
A water heater set to deliver 120°F (49°C) water to the washer.
A grounded electrical outlet located within 6 ft (1.8 m) of 
where the power cord is attached to the back of the washer. 
See “Electrical Requirements.”