Philips DCD7010/12 Manual De Usuario
19
Tip
•
To overwrite a programmed station, store
another station with its sequence number.
•
[STEREO] is default setting for tuner mode.
•
Under tuner mode, you can press OK repeatedly
to toggle between [STEREO] and [MONO], and
the unit memorizes your setting even if you turn
off the unit or turn to other sources.
Tune to a programmed radio
station
1
Press
RADIO.
2
Press / repeatedly to select a
programmed radio station.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press
RDS/INFO repeatedly to scroll
through the following information (if
available):
»
Station name
»
Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop music)...
»
Frequency
Synchronize clock with RDS station
You can synchronize the clock time on the
unit with an RDS station.
1
Tune to an RDS radio station that
transmits time signals.
2
Press
RDS/INFO for over 2 seconds.
»
[CT SYNC] is displayed and the unit
reads RDS time automatically.
»
If no time signal is received, [NO CT]
is displayed.
Note
•
The accuracy of the transmitted time depends
on the RDS station that transmits the time signal.
7 Listen to FM
radio
Note
•
A maximum of 20 radio stations can be stored.
•
Fully extend the FM antenna for better
reception.
Program radio stations
automatically
1
Press
RADIO.
2
Press and hold PROGRAM for 2 seconds.
»
A U T O
appears.
»
Available stations are stored
automatically.
»
The first programmed radio station is
broadcast automatically.
Program radio stations
manually
1
Press
RADIO.
2
Long press
/
to search to a radio
station, or press
/
to manually
tune to a radio station.
3
Press
PROGRAM to program the current
station .
»
The sequence number blinks with the
current frequency displayed.
4
Press / to allocate a sequence
number from 01 to 20 to this radio
station.
5
Press
PROGRAM to confirm.
»
The sequence number and the current
frequency are displayed.
6
Repeat steps 2-5 to program more
stations.
EN