Philips DCD7010/12 Manual De Usuario

The aspect ratio of the TV screen cannot be

changed even though you have set the TV

display format.

• The aspect ratio is fixed on the loaded

DVD disc.

• The aspect ratio may not be changed for

some TV systems.

The disc does not play high-definition video.
• Make sure that the disc contains high-

definition video.

• Make sure that the TV supports high-

definition video.

Sound

No audio output from the TV.
• Ensure that the audio cables are

connected to the audio input of the TV.

• Assign the audio input of the TV to the

corresponding video input. See the TV

user manual for details.

No sound or poor sound

• Adjust the volume.
• Disconnect the headphones.
• Check that the speakers are connected

correctly.

No audio output from the loudspeakers of

the audio device (stereo system/amplifier/

receiver).
• Ensure that the audio cables are

connected to the audio input of the audio

device.

• Turn on the audio device to its correct

audio input source.

Play

No disc detected

• Insert a disc.
• Check if the disc is inserted upside down.
• Wait until the moisture condensation at

the lens has cleared.

• Replace or clean the disc.
• Use a finalized CD or correct format disc.

11 Troubleshooting

Caution

•

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair

the system yourself.
If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the philips web site (www.

philips.com/support). When you contact philips,

ensure that your apparatus is nearby and the

model number and serial number are available.
No power

• Ensure that the AC cord of the apparatus

is connected properly.

• Ensure that there is power at the AC

outlet.

• As a power-saving feature, the system

switches off automatically 15 minutes

after track play reaches the end and no

control is operated.

Picture

No picture

• Check the video connection.
• Turn on the TV to the correct Video-In

channel.

• Progressive scan is activated but the TV

does not support progressive scan.

Black and white or distorted picture

• The disc does not match the TV color

system standard (PAL/NTSC).

• Sometimes a slight picture distortion may

appear. This is not a malfunction.

• Clean the disc.
• A distorted picture may appear during

progressive scan setup.