HP (Hewlett-Packard) 760c Manual De Usuario
16
Displaying and Adjusting the Image
Projecting the Image
Make sure your projector and other equipment are set up as described
on page 35. Then follow the instructions below to start the projector
and display an image.
on page 35. Then follow the instructions below to start the projector
and display an image.
Turning On the Projector
Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 17).
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 17).
Follow these steps to turn on the projector:
1. Remove the lens cap.
2. Plug one end of the power cable into the projector, and the other
end into an electrical outlet.
The
Power
light comes on.
note
To shut down the projector,
see page 24. Shutting down
the projector correctly
prevents premature lamp
failure and possible damage
from overheating.
see page 24. Shutting down
the projector correctly
prevents premature lamp
failure and possible damage
from overheating.
Power light
Montreal User's Guide.book Page 16 Tuesday, April 19, 2005 11:27 AM