HP (Hewlett-Packard) 760c Manual De Usuario

Once you see your image, you need to make certain adjustments:    

■

If the image is too high or too low, you can reposition it. See 
below.

■

To focus or zoom your image, see page 22. 

■

If the image isn’t square, see page 22.

■

If a computer image displays incorrectly, see page 24. 

If you need to fine-tune the image and/or sound, see Chapter 4.

If the image is too low on the screen, you can use the front adjustable 
foot to raise it. 

1. Stand behind the projector. Press the blue foot release lever up 

and lift the front of the projector. 

2. Once the image is positioned where you want it, release the lever 

to lock the foot in position.

3. If necessary, you can fine-tune the height or level the image by 

turning the projector’s rear foot. 

Raising the projector causes the image to distort or “keystone,” but 
you can manually correct the shape as described on page 22. 

Projector rear foot

Montreal User's Guide.book  Page 21  Tuesday, April 19, 2005  11:27 AM