HP (Hewlett-Packard) 760c Manual De Usuario

3. Press the P

Power

 button again. The lamp turns off. When the 

projector beeps twice (after about 3 seconds), you can unplug the 
power cord. 

(If the projector is mounted on the ceiling, you will need to wait 
10 seconds for the projector to cool down before you can unplug 
the power cord.)

If you want to turn the projector on again, make sure the orange 
light is not flashing, then press the P

Power

 button.

4. If you extended the adjustable front foot, press up on the blue 

foot release lever to retract it.

5. Replace the lens cap.

The Direct Power On function enables faster setup. The projector will 
start up automatically when you plug it in; you won’t have to press the 
P

Power

 button. 

Follow these steps to enable Direct Power On: 

1. Press the 

Menu

 button on the remote control and select the 

Extended

 menu. 

2. Choose 

Operation

 and press 

Enter

. 

3. Choose 

Direct Power On

 and press 

Enter

.

4. Highlight 

On

 and press 

Enter

. 

5. Press 

Esc

 or 

Menu

 to exit. 

The setting will take effect the next time you plug in the projector.

Montreal User's Guide.book  Page 25  Tuesday, April 19, 2005  11:27 AM