Crestron electronic 2-Series Control Processor Manual De Usuario

Crestron CP2/CP2E 

 

2-Series Integrated Control Processor

 The units can be powered through the NET network connector, or by an optional 
AC power pack (purchased separately). If an external power supply is to be used, 
Crestron recommends its CNPWS-75 External Power Supply or PW-2420RU 
Universal Power Pack, or equivalent. 

NOTE:  Use care in wiring installations to avoid applying 24 VDC power to Cresnet 
wiring from an AC power pack as well as from a system device that contains its own 
power supply. Although this condition should not cause any damage, Crestron does 
not recommend it. In those network configurations that require more power than can 
be supplied by Crestron’s Power Control Unit alone, disconnect the +24 VDC 
Cresnet wire from those devices that will be powered by an AC power pack. 

SIMPL Windows is Crestron’s graphical, Windows-based development tool for 
programming control systems. The SIMPL Windows interface provides two 
workspaces: the Configuration Manager, for configuring the control system, 
touchpanels, and controlled network devices; and Program Manager, for designing 
the logic and functionality of the control system. 

In addition, you can use Crestron’s powerful Viewport utility to accomplish multiple 
system tasks, such as uploading the program to the control system and performing 
diagnostic functions. Together with the Crestron Database, these tools provide you 
with the essential components you need to program the CP2/CP2E. Crestron 
software is available on CD-ROM, or can be downloaded from the Crestron website 
(

)—registration is required for downloading. 

Following are the minimum software requirements for the PC: 

•  SIMPL Windows version 2.00.28, with Library Update 145 
•  Crestron Database version 15.6.2 
•  (Optional) VisionTools Pro-e software for designing touchpanel pages 
•  (Optional) Application Builder (also requires SIMPL+ Cross Compiler) 

software for automatic residential and commercial programming 

•  (Optional) DEAL for Windows IR learning software version 2.07 

In Configuration Manager, drag the CP2 or CP2E from the Control Systems folder of 
the Device Library to System Views. The CP2 and CP2E appear nearly identical, 
except that the CP2E provides an additional slot for Ethernet devices, as shown 
below. 

 

•  13