Century 44339 Manual De Usuario
10
FORWARD-FACING INSTALLATION WITH VEHICLE SEAT BELTS
Store
LATCH
belt by attaching to openings in
top of car seat. (see page 24 fig. m).
• Hook connectors into storage openings
on each side of seat. (fig. a).
• Adjust
LATCH
belt to remove excess
slack by adjustment belt.
Adjust car seat to upright position (see pages 18
and 19 Fig. c) and place forward-facing on vehicle
seat.
and 19 Fig. c) and place forward-facing on vehicle
seat.
Thread vehicle seat belt through openings.
Buckle belt (fig. b).
Buckle belt (fig. b).
Press down firmly in center of car seat to compress
vehicle seat cushion while tightening vehicle seat
belt.
Use your knee to press down in center of car seat
(fig. c).
vehicle seat cushion while tightening vehicle seat
belt.
Use your knee to press down in center of car seat
(fig. c).
1
2
3
4
LATCH
belt MUST be stored when
using vehicle seat belt to install car
seat.
seat.
WARNING
Pull front to back and left to right to check for
secure installation (fig. d). Vehicle lap belt
MUST stay tight.
secure installation (fig. d). Vehicle lap belt
MUST stay tight.
If not secure, see “Vehicle Seat Belts” page 25.
Attach tether strap hook (A) to anchor
hardware (B) and tighten strap to remove any
slack (fig. e) . If vehicle does not have anchor
points to attach tether hook, tether hook
should be stored, see “Tether Storage”,
page 31.
hardware (B) and tighten strap to remove any
slack (fig. e) . If vehicle does not have anchor
points to attach tether hook, tether hook
should be stored, see “Tether Storage”,
page 31.
Periodically check that car seat is securely
installed; adjust if necessary.
installed; adjust if necessary.
5
6