Sennheiser DW Pro1/Pro2 Manual De Usuario
You can also establish or disconnect the wireless link by pressing
the PC button
the PC button
or the PHONE button
on the base station
(depending on the selected mode (
PC
or
Phone
), see page 28).
If your telephone has a built-in electronic hook switch supporting
the MSH standard (see page 13), you can only disconnect the wire-
less link between headset and base station by placing the headset
into the base station. The control signals (“accept a call”, “end a
call”) of the headset are still transmitted to the electronic hook
switch without any restrictions.
the MSH standard (see page 13), you can only disconnect the wire-
less link between headset and base station by placing the headset
into the base station. The control signals (“accept a call”, “end a
call”) of the headset are still transmitted to the electronic hook
switch without any restrictions.
Using the headset system
24
Putting the headset on and adjusting it
왘
Rotate the microphone boom as shown.
왘
Carefully bend the flexible microphone boom so that the microphone
points towards your mouth.
Maintain a distance of about 0.8-1.2“ (2-3 cm) between the micro-
phone and the corner of the mouth.
Maintain a distance of about 0.8-1.2“ (2-3 cm) between the micro-
phone and the corner of the mouth.
If you are using the Pro1 headset:
왘
or right ear and that the headband
runs over the top of your head.
If you are using the Pro2 headset:
왘
Put on the headset so that the ear pads
rest comfortably on your
ears.
2-3 cm
Right
Left
Pro1
Pro2
7
9
9
1