Garmin 190-01098-00 Manual De Usuario

Basic Operation

1.  Select 

.

2.  Turn the 

 knob to access different channels.

3.  Select 

.

1.  Select 

.

2.  Select 

.

NOTE: This scan does not include Channel 16 unless you saved Channel 16 to memory. 

However, you can select 

 to scan Channel 16 every other channel (for example: 21, 

16, 32, 16). When this setting is active, the soft key displays -16. Select 

 to scan your 

saved channels in their normal order (for example, 08, 10, 11, 14).

When repeat is turned on, the radio records up to the last 90 seconds of the last received 

transmission. When repeat is turned off, recording is disabled; the radio plays back the last 

saved transmission from when repeat was on. During playback, the radio does not receive 

transmissions on the current channel.
The radio will not save the beginning (less than one second) of each received transmission. 

This prevents intermittent RF noise from overriding audio transmissions that have been 

received and saved

1.  Select 

. The radio plays back up to the last 90 seconds of the last received 

transmission.

2.  Select 

 or 

.

1.  Select 

. The radio plays back up to the last 90 seconds of the last received 

transmission.

2.  Select 

 again to play the message from the beginning.

IMPORTANT: The radio disables multiple-channel monitoring (Dual watch and Tri watch)  

if you turn on ATIS. See 

.

Use the Watch feature to monitor priority channels and the currently selected channel for 

broadcasting activity. Channel 16 is the first-priority channel on your radio. Channel 9 is the 

default second-priority channel, but you can select another channel as your second-priority 

channel. For more information on reprogramming the second-priority channel, see