Glen Dimplex Home Appliances Ltd BE815 Manual De Usuario

Descargar
Página de 28
TEMPERATURE CONTROL AND ADJUSTMENT 
Operating temperatures are controlled by the thermostat knob (see diagram) 
located on the ceiling of fridge compartment. Settings may be made from 1 to 
5, 5 being the coldest position. 
When the appliance is switched on for the first time, the thermostat should be 
adjusted so that after 24 hours, the average fridge temperature is no higher 
than +5°C (+41 °F). We recommend you set the thermostat half way between 
the 1 and 5 setting and monitor to obtain the desired temperature i. e. towards 
5 you will obtain a colder fridge temperature and vice versa. Some sections of 
the fridge may be cooler or warmer ( such as the salad crisper and the top part 
of the cabinet ) which is quite normal. 
The normal storage temperature of the freezer should be -18°C (0°F). Lower 
temperatures may be obtained by adjusting thermostat knob towards 5 position. 
We recommend that you check the temperature with an accurate thermometer 
to ensure that the storage compartments are kept to the desired temperature. 
Remember you must take your reading very quickly since the thermometer 
temperature will rise very rapidly after you remove it from the freezer. 
Please remember each time the door is opened cold air escapes and the internal 
temperature rises. Therefore never leave the door open and ensure it is closed 
immediately after food is put in or removed. 
In case of a temporary ice build up in the fridge compartment, reduce the 
thermostat setting to 1, monitoring at the same time that the fridge 
temperature is maximum +5 degrees C [41 degrees F]. Once the ice build 
up disappears and the appliance starts auto defrosting again as normal, 
then you may increase the thermostat setting, if required.