AEG 111 K - W/D/G Manual De Usuario
19
Connection
Min. size
Cable / flex Fuse
via
Cable/flex
type
• Cooker
6 mm
2
PVC/PVC
30 A
Control
twin and
Circuit
earth
For Uk use only
For Europe use only
Min. size Cable/flex
Cable / flex type
Fuse
2.5 mm
2
H05 RR-F
30 A
Permanent Connection
In the case of a permanent connection, it is necessary that you install
a double pole switch between the hob and the electricity supply
(mains), with a minimum gap of 3 mm. between the switch contacts
and of a type suitable for the required load in compliance with the
current electric regulations.
a double pole switch between the hob and the electricity supply
(mains), with a minimum gap of 3 mm. between the switch contacts
and of a type suitable for the required load in compliance with the
current electric regulations.
The switch must not break the yellow and green earth cable at any
point.
point.
Ensure that the hob supply cord does not come into contact with
surfaces with temperatures higher than 50 deg. C.
surfaces with temperatures higher than 50 deg. C.
Supply Cable Specifications