Smeg CS71-5 Manual De Usuario

 

 

 

The room containing the appliance should have an air supply in 
accordance with B.S. 5440 part 2 1989. 
1.

  All rooms require an opening window or equivalent, and some 

rooms will require a permanent vent as well. 

2.

  For room volumes up to 5 m

3

 an air vent of 100 cm

2

 is required. 

3.

  If the room has a door that opens directly to the outside, and the 

room exceeds 1 m

3

 no air vent is required. 

4.

  For room volumes between 5 m

3

3

2

 and 10 m  an air vent of 50 cm  is 

required. 

5.

  If there are other fuel burning appliances in the same room B.S. 

5440 part 2 1989 should be consulted to determine the air vent 
requirements. 

6.

  This appliance must not be installed in a bed sitting room of less 

3

than 20 m  or in a bathroom or shower room. 

Windows and permanent vents should therefore not be blocked or 
removed without first consulting a Corgi gas installer. 
Failure to install appliances correctly is dangerous and could lead 
to prosecution. 
The room must be kept adequately ventilated to remove the heat and 
humidity produced by cooking; after prolonged use in particular, open a 
window or increase the speed of any fans installed. 

 

       (Please see connection diagram) 
 

Make the connection to the appliance using flexible 
bayonet style hose in accordance to B.S. 669. The 
hose connection at the rear of the appliance has a 
1/2" BSP internal thread. Please use seal C
between the flexible connection L

and the 

appliance supply tube B. When making the 
connection, make sure that no stress of any kind is 
applied to the cooker and that the hose does not 
touch any sharp edges. 
If connecting to LPG the bayonet hose must 
have red bands on it.

When installation is complete, check for any leaks 
with a soapy solution and never with a naked 
flame.

 

Take care that the hose is not crushed or 
damaged.