Honeywell DR4300 Manual De Usuario
Configuration, Startup, and Operation
of Recorder with Display
12/03
DR4300 Circular Chart Recorder Product Manual
127
Step Operation Press
Action/Result
5
Enter the setpoint
DISP
until
Upper Display
shows the input (PV) value.
Lower Display
SP and the setpoint value for
the selected channel.
or
Adjust the setpoint to the value at which you want the
process variable maintained.
process variable maintained.
6
Select automatic
mode
mode
MAN
AUTO
RESET
AUTO
RESET
Until “A” indicator is ON.
The recorder is in Automatic mode.
The recorder is in Automatic mode.
The recorder will automatically adjust the output to
maintain the process variable at setpoint as tracked by
the pen trace.
maintain the process variable at setpoint as tracked by
the pen trace.
7
Start up Controller
#2
#2
FUNC
Until INP 2 indicator on left side of display is lit.
For recorders with two control outputs enabled, repeat
steps 2 to 6 for the second control output, but be sure
INP “2” indicator is lit instead of INP “1”.
steps 2 to 6 for the second control output, but be sure
INP “2” indicator is lit instead of INP “1”.
8
Exit Startup
Close the door and monitor the operation.