Burris LH 3 Manual De Usuario
Chapter 2
Remove Bezel, Cover, and Components
17
Move the NetServer
Using enough people for safe handling, lift the NetServer onto an empty work
surface for easy access to the interior and to the face of the chassis. Rotate the
NetServer so that Cover 1 is now on top, as shown in Figure 2-5. (Cover 2, which
was the top of the pedestal configuration, becomes the right side of the
rack-optimized configuration.)
surface for easy access to the interior and to the face of the chassis. Rotate the
NetServer so that Cover 1 is now on top, as shown in Figure 2-5. (Cover 2, which
was the top of the pedestal configuration, becomes the right side of the
rack-optimized configuration.)
Cover 1
Cover 2 Becomes
Right Side of
Rack-Optimized
Configuration
Right Side of
Rack-Optimized
Configuration
Figure 2-5. Remove the Casters (Front View)
Remove the Casters
Remove the casters from the NetServer by unfastening the screws that secure them
to the NetServer chassis.
to the NetServer chassis.