Burris LH 3 Manual De Usuario

 

The Cable Management Arm for the HP NetServer can only be mounted on HP 
Systems racks. The HP NetServer Cable Management Arm allows the cables, 
including the power cords, to move in and out with the HP NetServer chassis on its 
slides without being accidentally disconnected (see Figure 3-8). 

Before sliding out the HP NetServer, ensure the anti-tip foot 
from under the front of the rack is extended or the anti-tip 
feature is installed. A tip-over hazard exists, so never slide 
more than one component out of the rack at a time. 

 

1.  Ensure the HP NetServer is pushed all the way into the rack.  

 

2.  At the rear of the NetServer, place rack nuts on the left column in the 17th 

and 18th holes above the baseline of the HP NetServer (see Figure 3-8).