Compaq 230934-002 Manual De Usuario
Command Line Interface
Modular SAN Array Fabric Switch 6 User Guide
C-13
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
Example:
Figure C-10: Hwcfg command
Log
This command will display and modify the event-log settings. When an event occurs,
if the event’s severity matches the “LogLevFilter” setting, the event will be logged
into the event-log buffer. If the event’s severity matches the DispLevFilter setting,
the event will be displayed on the console. “List” will display the entries contained
in the event-log buffer. “Upload” will upload the event-log entries to the server
specified by “Tftplp” into a file specified by “Tftp Filename.” Press Ctrl-C
to temporarily disable the event log display. Press Ctrl B to enable the event log
display.
if the event’s severity matches the “LogLevFilter” setting, the event will be logged
into the event-log buffer. If the event’s severity matches the DispLevFilter setting,
the event will be displayed on the console. “List” will display the entries contained
in the event-log buffer. “Upload” will upload the event-log entries to the server
specified by “Tftplp” into a file specified by “Tftp Filename.” Press Ctrl-C
to temporarily disable the event log display. Press Ctrl B to enable the event log
display.
Syntax
Log
Display event-log settings
Log LogLevFilter = <level>
Modify the event-log level
filter
Log LogModFilter = <level>
Modify the event-log module
filter
Log DispLevFilter = <level>
Modify the event-log
display level filter
Log DispModFilter = <level>
Modify the event-log
display module filter
Log PrtMsgLvl <prt> = <num>
Modify the port message
level