Compaq 230934-002 Manual De Usuario

  

When using the ACU-XE to initially configure the switch, depending on the 
controller’s settings and the current switch configuration, you will be shown various 
options. The ACU-XE will prompt for information through specific screens, allowing 
changes before they are saved.  

In addition to accessing the ACU-XE, the switch configuration process is separated 
in to two parts: 

•  Initial switch configuration 
•  Advanced switch configuration 

As discussed previously, initial switch configuration includes setting the IP address, 
Subnet Mask, and Default Gateway of the switch (and the redundant switch, if 
installed). Until these Ethernet and SNMP parameters are entered, a Web Browser 
cannot find or connect to the switch. 

Advanced switch configuration includes managing and monitoring ports, setting up 
zoning, and upgrading the switch firmware. Advanced configuration tasks are 
performed in using the MSA Fabric Switch 6 Management Utility. A link to this 
utility is provided in the ACU-XE. 

 

NOTE:  The switch configuration utility Web link to the MSA Fabric Switch 6 Management 
Utility is present only if the selected controller supports this feature.  

 

NOTE:  In the following screen examples, the configuring server’s IP address is 
10.100.100.14. One switch has an IP address of 10.100.100.10 and the other switch’s IP 
address is 10.100.100.11.