Cognitive Solutions Advantage RFID Thermal Printer Manual De Usuario
P R O G R A M M I N G
WT
Function
Write Tag. This command stores the quoted data to
the RFID-Tag currently positioned over RFID
Reader/Writer H/W. The data will begin storage at
Reader/Writer H/W. The data will begin storage at
the ss Tag-block and extend to and Zero pad any
unused bytes within the ending block.
unused bytes within the ending block.
Explicit Form
WT ss “data”
Parameters
ss
Starting block to begin reading octets
(bytes)
“data”
Collection of data octets to be written to
the RFID tag. The size of "data" must
be in the range of 1-255 octets.
the RFID tag. The size of "data" must
be in the range of 1-255 octets.
Response
No specific response
Command Type
RFID Standard Command
Example To
Printer:
! 0 100 800 0
DELIMIT $
WT 0 "123-1234-123"
WT 4 "John Q. Public"
WT 10 "Cardiac Care Unit"
RT 0 3 "A" 33
RF HOST "$RF 33$"
END
From Printer:
123-1234-123
NOTE: In this initial Adv-LX RFID Printer, the Skyetek-
M1 Reader/Writer Module limits individual Read or
Write transfers to/from the RFID-Tags to 64-bytes
maximum. CPL command lines are naturally limited to
256-bytes. Therefore, 4 separate 64-byte WT
commands must be executed to fill a 256-byte RFID-
Tag,
M1 Reader/Writer Module limits individual Read or
Write transfers to/from the RFID-Tags to 64-bytes
maximum. CPL command lines are naturally limited to
256-bytes. Therefore, 4 separate 64-byte WT
commands must be executed to fill a 256-byte RFID-
Tag,
Copyright © 2004, Cognitive.
45