Cognitive Solutions A776 Manual De Usuario

Descargar
Página de 192
Chapter 5: Programming commands  109
A776-PG00001 C 12/09 
A776 (B780) Programming Guide
Select page mode
ASCII 
ESC L 
Hexadecimal  1B 4C 
Decimal 
27 76
Switches from standard mode to page mode. After printing has been completed either by the print and return to 
standard mode (FF) command or select standard mode (1B 53) the printer returns to standard mode. The developed 
data is deleted after being printed. For more information see page mode in this document.
This command sets the position where data is buffered to the position specified by select print direction in page mode 
(1B 54) within the printing area defined by set print area in page mode (1B 57).
This command switches the settings for the following commands (which values can be set independently in standard 
mode and page mode) to those for page mode.
•  Set right-side character spacing (1B 20)
•  Select 1/6-inch line spacing (1B 32)
•  Set line spacing (1B 33)
It is possible only to set values for the following commands in page mode. These commands are not executed.
•  Select or cancel 90 degree clockwise rotation (1B 56)
•  Set counter-clockwise rotation (1B 12)
•  Select justification (1B 61)
•  Select or cancel upside-down printing (1B 7B)
•  Set left margin (1D 4C)
•  Set print area width (1D 57)
The table that follows shows the difference in memory allocation in page mode when using monochrome and two-
color paper. Two-color paper mode requires extra memory in order to differentiate between non-black and black.
Paper type   Total memory 
Area of 
 
allocated (kBytes)  construction (mm)
Monochrome  40.5 
72 wide × 72 high 
paper
Two-color  
81.0 
72 wide × 72 high (dots) 
paper 
 
72 wide × 72 high (energy)
Slip paper 
20 
200 wide × 704 high (full dots) 
Exceptions
The command is enabled only when input at the beginning of a line.
The command has no effect if page mode has previously been selected.
For the A756 emulation mode this command has a different definition. The select page mode function is not available 
in the  A756 emulation mode.