Black Box PI125A-R2 Manual De Usuario
12
SERIAL
↔PARALLEL CONVERTERS
The Converters use a miniature configuration switch
package. To configure your unit, use a small screwdriver
and gently push each switch to its proper setting. The
ON and OFF positions are shown in Figure 3-2. Default
settings (noted with an asterisk) for the DIP switches
are shown in the table on the following page.
package. To configure your unit, use a small screwdriver
and gently push each switch to its proper setting. The
ON and OFF positions are shown in Figure 3-2. Default
settings (noted with an asterisk) for the DIP switches
are shown in the table on the following page.
Set up the Converter by selecting the appropriate
DIP-switch settings for your application.
DIP-switch settings for your application.