Cabletron Systems 510 Manual De Usuario

Configuring the Router

 4-4

After the configuration exists in the clearVISN Router Configurator, for new 
routers, the following screens show the power-up sequence of the router being 
loaded by EasyStart:   

SmrtSwtch Rtr 5xx
===============================================================

                       SmrtSwtch Rtr 5xx INSTALLATION MENU

         * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
             To fully manage this device telnet to one of the
             following IP addresses or select item [3] below.
             Out-of-Band: Not Configured
             In-Band    : None Operational or Configured
         * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

                     [1]  Restart with Factory Defaults
                     [2]  Restart with Current Settings
                     [3]  Go to Local Console

==================================================================

                        Enter selection : 00:00:05   EZ.001: Starting.
00:00:06   EZ.007: Waiting up to 6 seconds for devices to pass self-test.
00:00:08   AI.001: Changed params on ifc 1 (Serial Datalink),
          from PSL to Frame Relay.
00:00:08   EZ.002: Changed one or more cfg params.
00:00:08  BTP.010: net 0, int Eth/0, Sent client request (htype: 1)
00:00:08  BTP.011: net 1, int SL/0, Could not snd client req because: Ifc not up
00:00:08  BTP.011: net 2, int ISDN/0, Could not snd client req because: Ifc type not suptd
00:00:08  BTP.007: net 0, int Eth/0, Valid Resp, 
          Server: Unknown(130.130.130.28),
          Bootfile: C:\Program Files\Cabletron\RConfig\DRS\rf10935f.drs.SRM
          VendOpts config file: None
          IpAddr 100.100.100.47, gwAddr 0.0.0.0
00:00:08  BTP.012: net 0, int Eth/0 No cfile in vendOptions, using bootfile fld instead
00:00:08   EZ.004: Rcvd boot info: ipAddr 100.100.100.47,
          ipMask 255.255.255.0 on intf 0
00:00:08   EZ.009: *** Restarting Router ***