Cabletron Systems 510 Manual De Usuario
Configuring the Router
4-16
[2] Set In-Band Interface IP Address
This option prompts you to change or enter the IP address and subnet mask
for the in-band interface. You can only configure one in-band interface at a
time. The router does not need to be configured with a subnet mask for SNMP
communications when management stations are on the same subnet as the
router.
for the in-band interface. You can only configure one in-band interface at a
time. The router does not need to be configured with a subnet mask for SNMP
communications when management stations are on the same subnet as the
router.
The format for these values is the standard 4-octet dotted decimal notation, in
which each octet of the address is represented as a decimal value, separated by
a decimal point (.).
which each octet of the address is represented as a decimal value, separated by
a decimal point (.).
The following example shows the dialog associated with this selection.
Enter selection 2
SmrtSwtch Rtr 5xx
=========================================================
=========================================================
IN-BAND INTERFACE IP ADDRESS CONFIGURATION
example: 134.12.13.14
To delete the IP address, enter 0 in the appropriate
================================================================
Enter the IP address [] : 134.12.13.14 <Return>
Enter the Subnet Mask [0.0.0.0] : 255.255.0 0 : <Return>
Press Return for IP Configuration Menu ...
Interface IP Address Subnet Mask Other Info
Ethernet
Format: The standard 4 octet dotted decimal notation in which
each octet of the address is represented as a decimal
value, separated by a "." character.
each octet of the address is represented as a decimal
value, separated by a "." character.
address field.
======