3com 3CRWE776075 Manual De Usuario
28 Upgrade your Switch to the Latest Software
Running a New
Software Image
Software Image
This sections describes how to run software that you have uploaded to
the switch. To put the software image into your switch, see “Loading
Software into the Switch” on page 27.
the switch. To put the software image into your switch, see “Loading
Software into the Switch” on page 27.
To run new software, you must set the image to become active after the
switch is reset. The Active Image tab identifies which image is currently
active and which image will be used after the next reset.
switch is reset. The Active Image tab identifies which image is currently
active and which image will be used after the next reset.
To select new software to run:
1 Select Administration -> Software Update, then click the Active
Image tab.
The Active Image field displays the name of the software image
currently in use (either Image 1 or Image 2).
currently in use (either Image 1 or Image 2).
2 Set the Active Image After Reset field to the other software image. For
example, if Active Image displays Image 1, set Active Image After
Reset to Image 2.
Reset to Image 2.
3 Reset the switch by selecting Administration -> Reset.