D-Link DFE-690TXD Manual De Usuario

 

14 

 

“Uplink” port. The “Uplink” port is only used when connecting your hub 
to another hub or switch.  

Included on the CD-ROM is a “DFE-690TXD PCMCIA Adapter Driver 
Program.”  It is a diagnostic program that will help you determine if any 
faults exist in your DFE-690TXD Network Adapters or connection. 

1.  Restart your computer in MS-DOS mode. (Click “Start,” then 

“Shut Down… ,” and  finally, select “Restart the computer in 
MS-DOS mode.”) 

2.  Insert the CD-ROM that came with your DFE-690TXD Cardbus 

PC Card into your CD-ROM drive. (e.g., D:\) 

3.  Type D:\DIAG.EXE at the MS-DOS prompt and press “Enter” 

to start the D-Link Diagnostic Program. 

4.  Read and follow the instructions on the screen (Press the F1 key 

for additional help.)  

5.  “Adapter Basic Diagnostic” will determine if any problems exist 

with DFE-690TXD. 

6.  “Network Diagnostic” will determine if problems exist with your 

network or connections. To use “Network Diagnostic,” please 
run program on both computers in MS-DOS Mode. 

If you encounter any problems, please contact D-Link technical support.